We’ve updated our Terms of Use to reflect our new entity name and address. You can review the changes here.
We’ve updated our Terms of Use. You can review the changes here.
/

lyrics

There were two versions of the Montauk Chair.

The Montauk Chair was developed by ITT World Communications for the government, or whoever had developed this project. The chair had essentially three coils. You can see the Y coil went like this under the floor, formed two sides of a pyramid, came out; another coil came up, and, uh, formed the other two sides of the pyramid, and then came out. The third coil was essentially two coils, one on the floor, and one on the top. And, uh, these provided the outputs with essentially an RF signal; the signal looked like white noise, but the correlations in the white noise was the information of what the person had in his mind sitting in the center of the pyramid.

Next.

They had problems with this chair, in as much as the coil structure was open. Uh, it picked up from outside as well as from inside. They had to locate this chair at Southampton, which was about 15 miles from Montauk, so it wouldn't feed back to the transmitter. The thing would feed back, lock up, and cause all sorts of problems. So they had taken the output of the Cray-1 computer, and microwaved it, uh, over to Montauk, and of course if you had any sort of glitch, of time glitch, or reality glitch go through the microwave beam, this thing was spitting back information at such a rate that it set the whole system into oscillations and caused all sorts of problems. So they came up with a second version of the chair. Next?

Now, based on information they've gotten from crashed UFOs, and technology exchange, or whatever, uh, they found out that essentially, you could put the victim between a set of Helmholtz coils. Helmholtz coils are interesting because they can be phased as such that the pickup would only be between all the coils; it would exclude, to some extent, all the junk outside. Now of course, if we go back to the pyramid antenna structure, this is something known as delta-T, or delta-time, sensing pickup type structure. This is one of the things a pyramid does: it does translate time waves. Now of course, they had to get the delta-time structure into the receiver.

And they, uh, replaced the Hammerlin SP-600 with an RCA receiver that they designed themselves, it was custom made, and they -- by placement of the coils & such in the receiver, they replicated the pyramid coil with the receiver itself.

Next.

These things are each individual coil stages. Uh, they apparently, for some reason, didn't want to use a ganged tuning cap, so each individual section of the preselector was an individually tuned network! They had separate tubes for each front end -- and this one is missing.

So the local oscillator sat down here, but of course this one was modified to use the local, uh, remote oscillator that was locked. If we go to the back, we can see every element in the vacuum tube has its own coil that sits right, uh, right underneath the big coil. Each is a pyramid shape, as you can see here.

Um, although there's a big metal plate, aluminum plate in here, there is a higher order, relativistic, psychic-energy-quantum-coupling between these coils and the coil up above -- that's the delta-T function.

And they talk of Synchrodynes... they pulse each one of these stages individually. And it was a real crazy odd setup for the way they pulsed these different stages on and off. Uh, what they were actually doing was loading a thought form here, shifting it into here, shifting it to here, loading more, shifting it, loading, loading, may--

credits

license

all rights reserved

tags

about

Synthetiv Vision Kingston, New York

Ghost wavesamples.
Virtual veins.
No data.

We can scan the local langscape for the tender shadow of Decoder Rose.

contact / help

Contact Synthetiv Vision

Streaming and
Download help

Redeem code

Report this track or account

If you like Synthetiv Vision, you may also like: